Jump to content

Search Results

There were 2 results tagged with Smoke Detectors

Sort by                Order  
  1. Kidde Recalls Smoke Alarms Due to Alarm Failure

    Consumers should immediately contact Kidde for a free replacement smoke or combination smoke/CO alarm. Consumers should keep using the recalled alarms until they install replacement alarms.
    They were sold at CED, City Electric Supply, HD Supply, Home Depot, Menards Inc. and other retailers, electrical distributors and online at Amazon.com, HomeDepot.com and shopkidde.com from January 2014 through July 2014 for between $30 and $50.
    From Kidde:

    September 11, 2014
    Walter Kidde Portable Equipment Inc. (“Kidde”) in conjunction with the U.S. ConsumerProduct Safety Commission (CPSC) announced a voluntary recall to replace certainKidde AC/DC smoke alarms and combination smoke/carbon monoxide alarms.
    A copy of the joint recall announcement can be seen by clicking here and attached is the safety notice. Kidde has sent copies to our retail customers with instructions to post a copy of the safety notice in stores that sold these alarms.

    This replacement program was initiated because the units may not perform as designed following a power outage. If a power outage occurs at the same second that a unit isperforming a sensor health check, the units may go into a “latched” mode, causing them not to alert to the presence of smoke. The unit will sound if it receives a signal from an
    alarm in the same interconnected system. Once power is restored, a latched unit will sound an alert, regardless of the presence of smoke or carbon monoxide, until power to the alarm is completely removed.

    It involves Kidde residential smoke alarms with model number i12010S manufactured between Dec. 18, 2013 and May 13, 2014, and combination smoke/CO alarms with model number i12010SCO manufactured between Dec. 30, 2013 and May 13, 2014 and model number KN-COSM-IBA manufactured between Oct. 22, 2013 and May 13, 2014.

    Kidde discovered the issue during an internal quality check. There have been no incidents reported, but due to our commitment to quality and safety, Kidde has taken action out of an abundance of caution. We have corrected the issue on future models, and are working with customers to obtain all affected units currently in stock.

    If you receive inquiries please direct them to contact Kidde at 1-844-553-9011 or www.Kidde.com.

    We value our relationship with the state fire marshals and NASFM and appreciate your
    understanding as we take care of this matter. If you have any questions, you can contact Neal Zipser, Kidde’s Community Affairs Manager, at 919-304-8264.

    Post until January 11, 2015 In cooperation with the U.S. Consumer Product Safety Commission
    i12010S i12010SCO KN-COSM-IBA (900-0114A)
    Name of Products:
    i12010S –10 Year Hardwired Smoke Alarm – manufactured 12/18/13 through 5/13/14
    i12010SCO – 10 Year Hardwired Combination Smoke/Carbon Monoxide Alarm – manufactured 12/30/13 through 5/13/14
    KN-COSM-IBA – Combination Smoke/Carbon Monoxide Alarm (front-load battery model only) – manufactured from
    10/22/13 through 5/13/14
    These units are AC/DC powered and capable of hardwired interconnect. They have a Kidde logo on the face of the unit.  The model number is on the label on the back of the unit.

    Identified Hazard: If a power outage occurs at the same second that a unit is performing a sensor health check, the unit may go into a “latched” mode, causing it not to alert to the presence of smoke. It will sound if it receives a signal from an alarm in the same interconnected system. Once power is restored, a latched unit will sound an alert, regardless
    of the presence of re and/or carbon monoxide (for combination units) until power to the unit is completely removed.

    Remedy: Replace Unit. Consumers should not take the alarm out of service until they receive a replacement from Kidde.

    Kidde Product Support: Kidde toll-free at 1-844-553-9011 between 8:00 a.m. – 5:00 p.m. EST Monday through Friday,
    except holidays, or visit our website at www.kidde.com.

    • Sep 18 2014 03:35 PM
    • by BraveSirRobbin
  2. SmartLabs announces INSTEON Smoke Bridge

    Interfacing smoke detectors is something most of us would like to do, but can be extremely complex and dangerous.  This solution does not physically touch the smoke detector unit(s) or wiring, so this is one of the more DIY-friendly solutions on the market now.
    The INSTEON Smoke Bridge is retailing for $34.99, and is available now from the SmartHome website.

    INSTEON®, manufacturers of the best-selling, most reliable home automation and control technology, today announced the INSTEON Smoke Bridge, a unique INSTEON device compatible with First Alert® ONELINK® carbon monoxide and smoke detectors. Featuring INSTEON’s award-winning technology in a sleek and compact design, the INSTEON Smoke Bridge combines the unparalleled reliability of INSTEON with the exceptional confidence of First Alert, guaranteed to bring peace of mind to every INSTEON connected home.

    “It’s easy to talk about products and features all day long; what’s much more difficult is talking about how your product provides a family with safety and security. With the new INSTEON Smoke Bridge, we’re certain that families everywhere will benefit from remotely monitoring their smoke detectors. It’s a peace of mind that will help everyone sleep much more soundly at night.”

    Joe Dada, CEO, INSTEON

    The INSTEON Smoke Bridge features a simple setup with plug-and-play ease. Pair the INSTEON Smoke Bridge with the new INSTEON Hub and users can receive text message or email alerts on their smartphone or tablet. The INSTEON for Hub application on your iOS or Android smartphone gives you remote monitoring capability and instant notification if ever there should be a carbon monoxide leak or fire detected in your home.

    The INSTEON Smoke Bridge retails for $34.99. For more information about INSTEON or the INSTEON Smoke Bridge, visit www.insteon.com/smokebridge

    With its simple installation and setup process and dependable communication, INSTEON has become the industry’s premier remote control networking technology. Plug-in modules and in-wall switches make it possible to add wireless control to any appliance in a home or business without having to hire a contractor. By making every networked device talk to each other via radio frequencies and existing electrical wiring, INSTEON eliminates the need for custom wiring.

    About INSTEON®

    Developed in Irvine, California, the award-winning INSTEON remote control product line has a growing list of devices, from lamp dimmers to thermostats and irrigation controllers. INSTEON delivers the fastest, most reliable wireless device communication in the industry with its innovative dual-band and simulcast mesh technology. INSTEON products are available through select retail partners, including Smarthome.com, Best Buy, Amazon, Newegg and Home Depot.

    [attachment=4900:2982-2221.jpg] [attachment=4901:smoke-bridge-story-31.jpg]

    • Feb 13 2013 08:34 AM
    • by Dan (electron)