Jump to content


Photo
- - - - -

need help settingup 4400r card and diginet


  • Please log in to reply
2 replies to this topic

#1 brisha rule

brisha rule

    Newbie

  • Registered
  • Pip
  • 1 posts

Posted 10 June 2008 - 11:53 AM

Hi, all

I am desperately looking for some help setting up my DVR.

Here is my computer spec:
Pentium4 1.7
MSI 845E MAX(Intel 845E Chipset)
512MB DDR
40GB Maxtor HDD (partitioned to 2)
ATI 9250SE 128MB
Intel Network Card

I picked up KMC-4400R Kodicom card (must be clone) from a local computer store in Toronto.
Software (diginet 4.11 and Tungson DRV 0.9.18.0) came with the card.

I've resinstlled the Windows XP Home.
Downloaded and installed the newest ATI DRV
Installed the card and device DRV for each 8 devices (4 video & 4 Audio)
Then installed the diginet site 4.11 then system reboots after finishing installations.
Diginet starts and stays on "Load diplay drive..........." ALT+TAB to diginet task then enter gets me "Couldn't load capture security driver" & "Unable to load device DRV" then restarts the Windows. :(

I have no idea what I'am missing. According to other posts this counterfeit(clone) card should be working on the Computer I have.

Can someone help me? Thanks in advance..... :rolleyes:

#2 Jorge Garrido

Jorge Garrido

    Newbie

  • New Member
  • Pip
  • 1 posts

Posted 19 March 2009 - 01:32 PM

You must install the KMC-4400R Kodicom card drivers

Hi, all

I am desperately looking for some help setting up my DVR.

Here is my computer spec:
Pentium4 1.7
MSI 845E MAX(Intel 845E Chipset)
512MB DDR
40GB Maxtor HDD (partitioned to 2)
ATI 9250SE 128MB
Intel Network Card

I picked up KMC-4400R Kodicom card (must be clone) from a local computer store in Toronto.
Software (diginet 4.11 and Tungson DRV 0.9.18.0) came with the card.

I've resinstlled the Windows XP Home.
Downloaded and installed the newest ATI DRV
Installed the card and device DRV for each 8 devices (4 video & 4 Audio)
Then installed the diginet site 4.11 then system reboots after finishing installations.
Diginet starts and stays on "Load diplay drive..........." ALT+TAB to diginet task then enter gets me "Couldn't load capture security driver" & "Unable to load device DRV" then restarts the Windows. :(

I have no idea what I'am missing. According to other posts this counterfeit(clone) card should be working on the Computer I have.

Can someone help me? Thanks in advance..... :)



#3 politics123

politics123

    Dedicated Cocooner

  • Registered
  • PipPipPip
  • 393 posts
  • Location:Washington, DC Metro

Posted 20 March 2009 - 05:56 AM

Can someone help me? Thanks in advance..... :)



*sigh* --> see fritzycat1's previous post about the "hack" (unloading and reloading device drivers)

hack




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users