- I cant connect to my ELK M1. Sometimes RP software connects, but then I get timeout messages during validation.
- The XEP module does not repspond to pings or I see huge latencies
- When turning off ELK M1 I can ping and "find" XEP without issues, but as soon as I turn ON ELK M1, the connectivity issue returns
Did you know that you can enjoy many members-only features simply by quickly registering (no CAPTCHA!)?
Registering gives you access to our giveaways, forum features, increased search performance, access to our Download Library, create your own blog & gallery, and more!
Once you have registered, stop by in 'Hello World', and introduce yourself.
Cant connect to ELK M1 via ELK-M1XEP M1 Ethernet Interface
Posted 05 December 2011 - 12:09 PM
Posted 05 December 2011 - 12:31 PM
Or, try just shutting down the xep and using the serial cable to connect and delete your rule.
Edited by Lou Apo, 05 December 2011 - 12:33 PM.
Posted 05 December 2011 - 01:21 PM
Posted 05 December 2011 - 02:05 PM
Posted 05 December 2011 - 02:44 PM
Posted 05 December 2011 - 03:47 PM
I went through all kinds of headaches because of this - In enterprise networking you need serial/terminal all the time - and especially when Windows 7 x64 was coming out - nothing but headaches and driver issues. I found one particular model of USB to Serial that has never failed me - I bought a bunch - for my whole department, and several for myself - and use them all the time across various OS's and have never had a single issue... This is the one I use - can be found at Fry's as well usually.
The hardest part is finding a computer with a com port. They just don't come that way anymore. You just pick the com port from Elk RP2 instead of "network" when you connect. USB to Com port adapters may work, before I bought the xep I used that. But I won't promise that all brands of usb to com port will work.
Posted 05 December 2011 - 04:57 PM
yup (need elk rp on the computer of course)
And I can just use the serial cable that runs from ELK-M1XEP and simply connect it to my old computers?
Go to "setup"/"communications"/"direct connection" and pick the com port you are using.
Then go to "connection"/"direct connection"
Edited by Lou Apo, 05 December 2011 - 05:11 PM.
Posted 26 February 2012 - 12:58 AM
I was unable to find any mention of a reset the XEP in the manual. But I did find a download program M1XEP_Diagnostics_Full_Install file. Does anyone one know what this program can do?
Posted 16 August 2012 - 10:44 PM
So now, armed with the knowledge that the problem was related to the ISY, I looked into my setup and compared to the manual and realized that I had set up the ISY to connect to Elk via the secure port. UD's manual clearly states that you need to connect to the non-secure port of the XEP module. It seems that one little oversight buggered the whole comm system!
I expect that sanders has fixed his system, but hopefully this post helps the next person in their search!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users