Omni Pro II e Time Update

I have a Omnipro IIe connected to my RadioRA system.  I really enjoyed getting it to do all the things I wanted.  The only thing I'd like to fix is that the time on the Omnipro drifts, this causes things to not happen when I programmed them.  I have the dealer software and it is easy to open and click on the time and it updates the time on the controller, but is there someway to get it to update on it's own?  It's connected to the internet so it seems like it shouldn't be to hard for it to get the time.
 
Thanks!!!

I believe that if you have an e-mail notifier board installed, it can update the time from a NTP server.  Otherwise, you can use the clock adjustment option to add or subtract from 1 to 29 seconds per day to compensate for drift.

HAIku Helper running on a Mac will update the Omni time as well.

There is a program called hailogger which runs on wintel that will also check and adjust your time amoung other stuff.
 
I guess it would be called donateware and is here.
 
I am still using it today.
 
Thank you rsw686.

I bought a e-mail notifier board and will try that.  I always wanted one, but felt it was something I didn't really need.  If it keeps my time synced then it becomes worth it!
 
Thanks!!!
 
mickhwrd