Elk M1 and SmartThings Hub

Hi, my Vera2 finally bit the dust so I moved over to a SmartThings to try it out.  Got it up and running easily enough with my thermostats, but I am missing my integration to the Elk M1.   Aside from having access to the alarm features I used the relays for sprinklers and to control a driveway gate.  
 
Anyone looked into integration to SmartThings?  I am not a developer, but would be interested in discussing further with anyone that had an interest/need to get the two talking.
 
Thanks

1. Return or sell SmartThings hub
2. Buy an ISY-994iZW Pro/IR

Buy Homeseer. Has a great Elk integration plus everything else.


Sent from my iPad using Tapatalk

A few forum users purchased SmartThings Hub v2, and indicated they successfully replicated configuration to VRC0P+3. The STHv2 is replaces the Leviton RFIT as primary controller. After the controller has been replicated, you shouldn't need to use STHv2 any more. I have not verified myself.
 
What kinds of Z-Wave devices do you have that are not supported by Elk M1XSLZW.

Hi, I have added a bunch of z-wave devices since moving from the Vera 2, but would still appreciate having a direct link to the Smartthings hub.  It would be much easier to setup away mode etc. that is already tied to setting the alarm when leaving the house.  Would also like to use all of the wired motion sensors for other purposes, to turn off a/c, water pump, etc.
 
I did not understand your post above regarding VRCOP+3.  
 
I would still like to find a way to work with someone to develop the Smartthings to talk to the Elk M1.
 
Thanks