Looking for a PCAccess programmer

I need some help with my lighting features on my OmniPro-II.  I have determined it is not a PIM or Phase Coupler issue, but something haywire in the lighting programming.  Thermostats and Security work fine.  I am happy to pay a reasonable rate to diagnose and repair this glitch.  And I think it can be done remotely.  Altgough, I live in Austin Texas, so if you are local that would be great, but not required.
 
I will provide full detail to those that may be interested.
 
 

What is the main problem you have with lighting?
 
why do you think is a programing issue?

I have eliminated any phase coupler or noise issues and have confirmed that the PIM is working.  I can turn on the first light in the series, but then none after.  The other quirk, when I turn on the the "Wine Room" light the Powder Room comes on instead.

After receiving some technical assistance, it may very well be the PIM.  So I have one on order just to eliminate that potential.  Hopefully that will fix it.

Powercat80 said:

I have eliminated any phase coupler or noise issues and have confirmed that the PIM is working.  I can turn on the first light in the series, but then none after.  The other quirk, when I turn on the the "Wine Room" light the Powder Room comes on instead.

Click to expand...

 
No noise can make it. The address assigned to light switch and PC access was wrong. 

My recommendation is to factory reset the PIM and all the 35A00 switches and start enrolling thru PC ACCESS, so will be able to right adress all the lights