Jump to content


Photo
- - - - -

ELK M1 Gold Clock has Died?


  • Please log in to reply
5 replies to this topic

#1 dlbelter

dlbelter

    Cocooner

  • Registered
  • PipPip
  • 14 posts

Posted 05 November 2019 - 09:54 AM

Have an M1G that is about 13 years old.  The system is still working fine, but the clock has stopped working (0/0/2000 12:00 AM).  Have tried all of the troubleshooting tips I could find on this forum;

- Replaced CR2032 battery

- Replaced back-up batteries

- System restarts.

 

Any other suggestions?



#2 mikefamig

mikefamig

    Cocoonut

  • Registered
  • PipPipPipPip
  • 3490 posts
  • Experience:novice
  • Hardware:Elk M1
  • Tech:UPB
  • CCTV:ip

Posted 05 November 2019 - 07:03 PM

Check your time server settings in Elk RP2 software.

 

Mike.



#3 dlbelter

dlbelter

    Cocooner

  • Registered
  • PipPip
  • 14 posts

Posted 06 November 2019 - 01:35 PM

I was not using a time server.  Is there a setting that would not allow the clock to be set?



#4 Lou Apo

Lou Apo

    Cocoonut

  • Registered
  • PipPipPipPip
  • 2716 posts
  • Location:Austin TX
  • Experience:average
  • Hardware:ISY-99
  • Tech:INSTEON
  • Audio:Custom
  • Video:Windows Media Center
  • CCTV:analog, dvr

Posted 07 November 2019 - 03:11 PM

Did this happen with the switch out of DST?  Elk firmware has had issues with that.  Though not just going to the old blinking 12:00, but still.  I'm not able to check my current firmware, but it is working very well.  Anyway, you might consider upgrading your firmware.



#5 dlbelter

dlbelter

    Cocooner

  • Registered
  • PipPip
  • 14 posts

Posted 08 November 2019 - 10:23 AM

I'll give it a try.



#6 mikefamig

mikefamig

    Cocoonut

  • Registered
  • PipPipPipPip
  • 3490 posts
  • Experience:novice
  • Hardware:Elk M1
  • Tech:UPB
  • CCTV:ip

Posted 08 November 2019 - 10:57 AM

Have you looked at the Sunrise/Sunset setting in ElkRp2 settings? It is under automation>Sunrise/Sunset

 

Mike.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users