123
Senior Member
I'm trying to figure out Premise with the Insteon driver. If I want to control an Insteon device, does the driver actually send real Insteon commands, or does it send X10 commands?
Is there a good tutorial on using the Insteon driver with Premise?
======================
Unfortunately, there is no tutorial for the driver. There are installation instructions in the revision history. I suggest you read the entire document to get an idea of feature/functions. In addition to the driver, you'll need a Smarthome PLC and a couple of SignalLincs.
While the driver supports X10, it's really designed to support the Insteon protocol through the PLC. The X10 support is limited to basic on/off switching.
Good Luck,
-John
Is there a good tutorial on using the Insteon driver with Premise?
======================
Unfortunately, there is no tutorial for the driver. There are installation instructions in the revision history. I suggest you read the entire document to get an idea of feature/functions. In addition to the driver, you'll need a Smarthome PLC and a couple of SignalLincs.
While the driver supports X10, it's really designed to support the Insteon protocol through the PLC. The X10 support is limited to basic on/off switching.
Good Luck,
-John
