Search results

My M1XEP is not working right now ;) Eureka! Sort of .... I reread the M1XSP setup manual, and on the page 26, it says JP5 must be On. so I tried that, and things are working much better (I'll explain). But, the manual should be changed, because it is misleading -- on page 9 of the setup...

Thanks so much! That is exactly what I needed to know.

I got a DSC RM-1 supervisor relay for the smoke detector, but it doesn't have any instructions on what color wire means what. I know to hook it to power and the NC zone, but I don't know which of the red, white, green, black, or yellow wires means what. I tried calling DSC -- they wouldn't...

Last image -- the Options tab where the LED light is controlled. Thansk again!

Notice that my "transmit status" checkbox is on a different tab than you mentioned, but I think it is still the right checkbox.

My UPStart Setup: I’m running UpStart version 4.5 Build 56 – is that the latest?

and my test rules

Darn -- it opens the files for me as html. So, I'll just attach the images from them, and put the text here. Here are the log entries from UPStart. So it looks to me like the status is transmitting just fine. 2,03/28/2007 19:30:01,2/2,129,Status,10,Unit 010 - Garage - Non-dim switch,,0...

finally doc 4 Notice that my "transmit status" checkbox is on a different tab than you mentioned, but I think it is still the right checkbox.

I really appreciate all the help. When I try to run M1_SDK.exe, I get -- "Component 'MSCOMM32.OCX' or one of its dependencies not correctly registered. A file is missing or invalid." Rather than tell you I checked everything, I decided to take screen shots of my RP setup and UpStart setup and...

I can buy a crossover cable and try that -- eliminates the router. But, how will the M1XEP know to listen? Or do I have it set to a fixed IP address? thanks.

I tested setting them as Dimmers, and that made no difference.

Thanks Steve -- yes, transmit lighting changes is checked, and I double checked from the kaypad that is it set to Yes. And no, I do not see the status on the keypad unless the M1G controlled the light. The switches are all configured as Serial Expander, On/Off switch. Do they need to say Dimmer...

I tried pinging 192.168.2.3 again, just in case – and one out of the 4 attempts did get a response. bytes=32 time=2ms TTL=60 I tried again and 4 timeouts. Again and 3 successes (time=2ms; time=<1ms; time=1ms), then the 4th failed. Tried again and all four timed out. Tried again and one of 4...

Well, I learned today that UPStart can log incoming messages, so I tested to see if my switches are sending the signals. They are sending just fine (both links and actual switch data), but the M1G doesn't seem to be receiving either. The M1G controls the lights just fine, so the communication is...

Okay, I interpreted the directions a little bit differently today, and so I removed the Jp2 jumper while the M1XEP was on. This allowed it to assign an IP address, as viewed by my router DHCP client list (192.168.2.3). That's the good news. The bad news is that ElkRP still doesn't find the...

My router is a Belkin 54g. I don't see anything listed under DHCP clients except my Tivo and my main computer now. I had tried putting a jumper on jp2 to force it to the address 192.168.0.251, but, I still couldn't find the M1XEP (in Firefox). So I removed the jumper, and it appears to be...

And, a related question -- when I originally set up the links in UPstart, I didn't pay attention to the link numbers. Well, they start at 106 (except for a couple of them). So, it looks like there is no way to change the numbers. I'll just have to delete them and re-enter everything so I can get...

I did go one step further and check both switches with rules, both on "lighting change" for the switch, and a link corresponding to the switch (including the link that should be invoked when I hit the top and bottom rocker switches). Nada. I also tried changing the transmit type for one of the...

Well, I tried a couple of things. First, I tried turning on that checkbox ("Report Light Level"), and nothing changed. So, I realized that there is nothing in the "Transmit Components" for the switch, so I tried invoking a link for when the bottom and top buttons are pressed. I didn't try...