pete_c
Guru
Testing before implementing an OmniTouch 5.7e.
I plugged it into the network via a POE connection. Appears to be booting but sits at the "Connecting, Please Wait ..." screen. It never leaves this screen.
I reset it by pressing the button adjacent to the LED and it goes through the boot process and goes back to the "Connecting..." screen.
If I leave it the screen goes dark until I touch it and see the "connecting..." screen.
Checking firewall it appears to be getting a DHCP address and I can ping it.
Next boot - answering my own question - don't see this mentioned in the manual. I just see:
Returning to the configuration page
To return to the Configuration Page at any time, press on any blank space on any page of the OmniTouch 5.7e Touchscreen, and hold for 5 seconds.
I touched the left hand bottom of the screen while in the "connecting..." screen and it went to the configuration.
I configured it for a static IP and configured the HAI OPII keys rebooted and all is well.
I plugged it into the network via a POE connection. Appears to be booting but sits at the "Connecting, Please Wait ..." screen. It never leaves this screen.
I reset it by pressing the button adjacent to the LED and it goes through the boot process and goes back to the "Connecting..." screen.
If I leave it the screen goes dark until I touch it and see the "connecting..." screen.
Checking firewall it appears to be getting a DHCP address and I can ping it.
Next boot - answering my own question - don't see this mentioned in the manual. I just see:
Returning to the configuration page
To return to the Configuration Page at any time, press on any blank space on any page of the OmniTouch 5.7e Touchscreen, and hold for 5 seconds.
I touched the left hand bottom of the screen while in the "connecting..." screen and it went to the configuration.
I configured it for a static IP and configured the HAI OPII keys rebooted and all is well.