W800RF Support

[rjsmith0]

Now that the M1G supports the W800 wireless interface, can someone tell me how to configure the M1XSP? I have received my M1G and M1XSPs, but I cannot find anywhere in the latest documentation that tells how the M1XSP should be configured. I am mainly wondering about the jumper device type settings.

Thanks!

J.

 

[Steve]

I don't have a W800, so here is my best guess:

The M1XSP needs to be set to Serial Port Mode:

S5 1
S6 0
S7 0
S8 0

Then it looks like the baud rate is 4800, so the on the XSP you set

S1 0
S2 0
S3 1

Of course you need to set the data bus address, etc correctly. This is from http://www.elkproducts.com/pdf/M1XSP_Light...al_Port_Exp.pdf Page 20.

 

[electron]

You only have to set the address and 4 jumpers when using a default configuration. Anyways, here are the jumper settings for the W800RF:

JJJJJJJJ
12345678
--------
10110111

 

[rjsmith0]

JJJJJJJJ
12345678
--------
10110111

Thanks Electron! That's exactly what I needed. It works perfectly.

J.