Hoping for a little help. First post to the forum although I have been reading other peoples posts for a while and I have troubleshot this problem to the end of my skill.
I have HAI 35A00-1CFL Master and Auxillary switches throughout my house. The vast majority of the bulbs are incandescent. Although some are LED. They were all originally programmed through PC Access. I have a HAI PIM connected to the OmniPro II and a seperate SA CIM attached to my computer. HAI phase couplers were installed with the original system.
I recently wanted to change the double tap functions, use the timer function and change the color or turn off the indicator LEDs on the switches. Through UpStart I can manipulate and edit all of the switches. Everything works perfect..... EXCEPT when the lights have the timer function tuned on, they pulse. If the lights are turned on and the timed auto-off function is enabled they are on for two seconds, flicker and come back on for two more seconds, flicker and on and on. The pattern is very regular and the flicker is very subtle. Happens with both incadescents and LED bulbs. No noise in the powerline. If the timed auto-function is turned off or by passed with a double tap or light command from SnapLink then the flickering goes away.
Has anyone else had this problem? Any thoughts on how to fix it. Thanks.
I have HAI 35A00-1CFL Master and Auxillary switches throughout my house. The vast majority of the bulbs are incandescent. Although some are LED. They were all originally programmed through PC Access. I have a HAI PIM connected to the OmniPro II and a seperate SA CIM attached to my computer. HAI phase couplers were installed with the original system.
I recently wanted to change the double tap functions, use the timer function and change the color or turn off the indicator LEDs on the switches. Through UpStart I can manipulate and edit all of the switches. Everything works perfect..... EXCEPT when the lights have the timer function tuned on, they pulse. If the lights are turned on and the timed auto-off function is enabled they are on for two seconds, flicker and come back on for two more seconds, flicker and on and on. The pattern is very regular and the flicker is very subtle. Happens with both incadescents and LED bulbs. No noise in the powerline. If the timed auto-function is turned off or by passed with a double tap or light command from SnapLink then the flickering goes away.
Has anyone else had this problem? Any thoughts on how to fix it. Thanks.