Email Notifier Board NTP Sync

Hi Folks,
 
   I've had this board for 2 years now and never checked to see if the "Enable Time Sync" field was set to "Yes". Well, it wasn't and I find my OMNI IIe system controller time fluctuates from time to time. I understand by setting this field to "Yes" there will be an NTP Sync performed once a day. I set this field to "Yes" yet the system time never gets synced. 
 
   An interesting observation: When I read the Email Notifier board config from the controller, the "Enable Time Sync" field is set to "No". That tells me that this field is not being enabled by PC Access. I've tried re-flashing the board and changing serial ports to no avail. Any recommendations to get this working?
 
Thanks,
  Randy

@Randy,
 
Noticed nobody answered your question.
 
Maybe a repost of the same question over here will work ===>
 

Home Automation, Inc (HAI)

Thanks pete_c!

FYI - I tried switching the email notifier board with a new one to test. Same behaviour so it's not the board.


Sent from my iPhone using Tapatalk

There have been some issues relating to the HAI Email board.
 
Are you using the most recent OmniPro firmware and HAI Email firmware?
 
See here ===>
 
Email notifier board
 

PC Access Version 3.15.0.803 (17/December/2015) & Email Notifier Update Released

OMNI IIe: 3.16
Email notification board: 1.5
It appears as though PCA is unable to update the "Enable Time Sync" field. Possibly a bug in the PCA software?


Sent from my iPhone using Tapatalk

Dunno.
 
I have not read about any similar issues under the HAI forum posts.

SOLVED!
Did a reset EEPROM then restored a backup. It's all working now!


Sent from my iPhone using Tapatalk