I am sure R1 & R2 require momentary close when used with remote hdwr, can't lay my hands on that manual right now. It certainly operates that way when I use jumper wire.
If I am not mistaken, C2 or B2 is the wiring setup (not related to remote operation). Our hard wired control switch has...
Hi az1324
Problem is my iTach is PoE :(
This is for a commercial door opener, which is hard wired, so I guess I'll get the Elk relay and I'll have to run an extension cord to power a 12V pwr supply.
Thanks guys!
I put the multi meter on the iTach, zero resistance when closed, infinite resistance when open - behaves as expected.
I would appreciate any online store links for a larger capacity relay that would be compatible with the iTach and the opener.
Thanks!
Thanks for the reply Frederick
It's easy to see if the iTach relay is open or closed, the green LED is lit when closed.
So to clear about my dilemma, when the iTach is open (LED is off) it behaves as closed when I connect the wires from the opener.
Although the opener is only 24VAC, I am...
Hi
Thanks for the reply
Connecting R1 & R2 with a wire causes movement in one direction. Doing it again cause the door to move in the opposite direction. This is the intended behavior.
I am pretty sure about the 24VAC, schematics attached.
The Global Cache iTach is providing open/close...
I am trying to automate a commercial door with iTach relay. It requires a brief connection between terminal R1 & R2 which I will achieve with Close/Open commands to the iTach. The problem is that as soon as I put the wires into the iTach terminal blocks, the door opener is activated - even...
Thanks Wes & elvis
Too bad about the tablet support, any time frame for the HD version for Android?
If it's coming in a matter of months I can plan for that.
Thanks for all the input :)
I had planned on the network module for the ISY.
elvisimprsntr: Mobilinc requires a monthly fee for cloud access, although the app is only $20. Are you saying I can have internet access without the cloud feature?
Correct me if I am wrong, but iRule is a one-time fee...
I don't like the idea of being tied to a cloud service (i.e. iRule) or a monthly service (i.e. mobilink)
I am looking for an Android app that can work directly with a lighting controller (ISY for instance) , IP devices (i.e. iTach) and my IP cameras. I've searched around Google Play but there...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.