Recent content by desaivid

Thanks Digger and Cocooner. Adding the keypads one at a time and changing the address of the second one followed by adding both to the system did the trick. Both keypads are enrolled. Now onto playing with the M1EXP. Thanks guys.

Thanks Digger. I wired and got the first keypad enrolled. Its when I added the second keypad is when the problem started. I guess I'll take the first one out, set the second one to address #2 and then see if they get happy being on at the same time. I can't use the ELk RP software as i am...

I have a bench setup to try out my new Elk m1G. I am trying to wire two ELK-M1KP2 keypads to the Elk M1G. I have a home run from the keypad to the panel from both. I thought i should be able to wire both to the databus without a M1DBH. I have both keypads terminated and wired to the databus...

Hey   About to replace an old Napco Gem 1632 security panel with an ELK M1. I'm going the DIY route.   Phase 1 Plan is to swap out the GEM 1631 with the ELK M1 and associated new keypads. Also to get this monitored via one of the DIY friendly monitoring services. I also have the ELK Ethernet...