Recent content by raptorsvt10

woops, i see you answered your question. i was so eager to help, i didn't finish reading your post...

I pasted this from an old post back in 2008. It's the only place that mentions this. https://cocoontech.com/threads/elk-m1-serial-and-ethernet-interface.9041/ From the M1's keypad enter installer programming, go to Globals G44, right arrow, enter 55555 into the a: field, press ***. Every...

I was able to stop the messages by turning off the undocumented global 44 "55555" option. That option tells the M1 to send the RF communication data in ascii thru port 0 so you can see RF traffic thru putty or hyperterminal. In my case, i had turned the option on years ago. Then when i recently...

I'm seeing the following ascii coming out of my Elk M1: 14IDRF-XRFTW-2-A02E1CC6 3DRF-A2-Z024-A02A70-I00-Cm01-85A02A70007C0008000120237F7F7F722A The 14IDRF line indicates it has a hex length of 14 (20), but it is hex 15 length (21). The 3DRF looks like a bad checksum. Anyone have any idea...

i used to do the following as a workaround to get zone specific emails from my XEP:   Set up XEP emails like this: 1 = 1 2 = 2 3 = 3 4 = 4 5 = 5 6 = Doors: 1Front, 2Back 3Side 4Overhead 5Basement. 7 = Windows 1Dining 2Kitchen 3Master 4Guest 5Living 8 = Smoke 1LivingRoom 2Garage 3MasterHall ... 9...

I "hear" you drvnbysound!   I was going to read that page for my 5th time tomorrow, but you beat me to it. What took you so long?   Okay, so now we have proof, a confession, a witness, and an interested party.   Here is the entire answer as posted that firmware page. Q: How does it eliminate the...

Trey  I haven't done anything with M1 Cloud but maybe look under the RP Setup Menu option for M1 Cloud. But I never requested an M1 Cloud id. Nevertheless, I think you have solved the puzzle. But this begs the question of why my M1 is stuck sending the UDP packet. So if i activated the broadcast...

Have to agree that is what this looks like. Some remnant of some fallback ip c.s call out.   Below entry is in my router internet sessions listing constantly. The timeout goes to zero then starts over every 30 seconds. (i'm sure the copy paste will not parse right the first time, so i'll be...

thanks, but: 1 - No it is not 224.x.x.x. 2 - if you say so 3 - not having problem finding xep   I've looked everything over multiple times. There is no doubt that every 30 seconds my M1 XEP is sending un-encrypted UDP as i described above to 24.176.94.177:2000.   I removed the redirects from my...

This is from smartsniff (w/ redirection to my PC's ip) Packets Stream Report Index 3 Protocol UDP Local Address 192.168.1.199 Remote Address 24.176.94.177 Local Port 2000 Remote Port 2000 Packets 304 {304 ; 0} Data Size 19,456 Bytes {19,456 ; 0} Total Size 28,060 Bytes {27,968 ; 92} Data Speed...

I don't think you are going to see it w/ wireshark since the broadcast comes from the XEP and goes out your router. Your PC won't see it since it doesn't go thru your PC. You'd have to mirror the port to see it.   I found the transmission by looking at active internet sessions on my router. It...

Yes I'm on the v2 XEP firmware. The firmware version is even part of the broadcast //02.00.22//.   But you may be on to something. But why would Elk hard-code a UDP broadcast to a specific IP every thirty seconds sending my serial number, mac, and firmware versions? I'm not sure i want my serial...

Anyone have any info on why my Elk m1 Gold XEP would send the following text as UDP to 24.176.94.177 every thirty seconds:   00000000//0//<elk serial number>//<xep mac address>//05.03.00//02.00.22//QUERY   the <elk serial number> is four 0's and the four digit serial number. the <xep mac...

wuench - i'll give you get the win.   bypass is the answer.   just go to a keypad, press bypass, type in the zone number of the 24hour tamper zone, press bypass again. then you can access the panel (closet) w/o alarm going off. when you are done working on the panel (or working in the closet)...

Okay, so I ordered a big red switch labeled "tamper override."   Is there any other way to access the panel w/o setting off a burglar alarm - like from the keypad by using installer code or with a set of rules?   Edit:   Sorry - Didn't mean to come off as a smart ass....   But is the answer that...