Recent content by smithfrank

There are no new features in this version.  Its a straight rebuild for Android 8 as some folks were reporting compatibility problems. We did do a previous version that supported the 16 outputs of the WC32 but haven't dusted that one off recently.  We looked at a multi-board version but that will...

smtp2go.com is a viable option.  I've used it for about 18 months with no issues.  Free with limits, great support.  requires a from address in the wc32 setup.  I use it on port 587.  See http://cocoontech.com/forums/topic/26227-wc32-email/page-3 discussion after gmail changed TLS requirements...

Thanks for the info.  Hopefully Microchip will have a new library available soon.  I previously used my own servers and may have to follow Ross's example and just go that route

We have not.  Fairly complex so we backburnerd it while we did some other work

wc32 with 4.02.11 firmware (update to 4.02.16 with same issue) is unable to send email.  Worked fine for about 10 months and as recently as 7-3-16.  Uses ssl, port 465 with un/pw auth to gmail account with "enable less secure devices to access" turned on   I have multiple boards and they behave...

Had no problems with existing apk when Android phone updated.  My son (junior CompEngr/Comp Sci major) recompiled with new libraries.  I am happy to provide if CAI can provide the download link as I believe uploaded attachments are not supported.  It is NOT backward compatible.  He has also...

thx

not looking to change it, only read it to clearly show whether the attached relay is on (OPx is1 in normal; 0 if inverted).

thanks but that gives me the current value of the output. What I am looking for is the state inverted flag from the I/O setup screen

A related question.  Can the output status be queried like the temp sensor status?  Specifically, from an Android app,  we would like to see if the OPx are inverted or not

uploaded new api.  worked fine.  fyi api file has .tar extension in zip file. renamed to .bin - thx

On the WC8 it was possible to save UROM values from other than the WC web interface.  Both the WC8 and WC32 PLC guide contain this tex:   from 3.02.17 firmware, WebControl supports manually set a UROM value from outside, uromid from 1 to 4...

did not appear to be pulling SDA. However when I put it back on the Arduino to test it there i can no longer get it to work.  will troubleshoot the device.  thanks

Having difficulty with an I2C module and looking for any insights.  Works fine with Arduino Mega2560 so i know hw is good.  Have tried on two WC32 w/ IO Exp boards.  Test code below.  Always branches to NO_DEV.  Without that simply "returns" 255.  Sensor is ATTiny 144 based and only operates in...

I had been using the IO board but in the last few weeks removed it.  I dn ever recall seeing the issue while the IO board was installed.  I'll put it back and/or try the pull up resistor