Can the Leviton USB installer and VRC0P support two networks?

[ghurty]

I am trying to add a Yale lock to my z-wave network. I am using the leviton USB installer and the VRC0P 3. From what is sounds like, the yale lock should be on a seperate network. Can the USB installer and VRC0P support two separate networks? Or would I need a second one.
 
THanks

 

[Dean Roddey]

It shouldn't be on a separate network. The USB stick is the master controller and the VRCOP is a secondary controller. They are both needed for the same network.

 

[drvnbysound]

In addition to what Dean stated, the USB stick CAN be used to setup multiple networks (e.g. for other homes, friends, etc).
 
All of the Zwave devices in your household should be on the same network, learned into the network via the USB stick, and added to the secondary controller. This is the only way that all devices will 'talk' to each other and provide a proper mesh network.
 
Having said that, most locks do require that you have Zwave devices that support beaming.