Recent content by divemstr

When in UPStart, make sure you have the Transmit Compoments (Links) set for the correct button, them go to the Receive Components and make sure the correct links are matched on the On and Off Buttons and that it says Do Nothing when the indicator comes on... This is the LED tracking portion of...

... PCS switches have always been able to send status update info. The simplest way is set the Transmit Components to sent status updates back to the controller, the controller is then programmed to receive the links being broadcast. The status information includes light level and device...

Which keypad are you using? HAI or PCS?

And the PCS PIM will work with the Omnii just fine. If you used it to program the devices with UPStart you will factory default the PIM when you connect it. FYI, if using the SAI switches, remember they will not be able to respond through a Split Phase Repeater (SPR) since Gen I devices only...

With all the good and bad about any option out there you must start with; what your expectations are... how large do you want to go (how many loads do you want to control)... will the system be stand alone on interfaced with a controller...etc There are proponents of RF systems and Proponents of...

First, PCS is currently manufacturing a new PIM-E that will connect directly to the M1... this means no expansion board will be needed. They will be ready soon (July 2010). There are many ways to receive a status back from controlling the lighting... you can program the switch to transmit a...

How big is the home (sq ft), how many electrical panels, number of UPB devices, which manuf products are you using, is there a Phase Coupler, have you run and log in UPStart