Recent content by edgeco

Thanks Pete!  I read through quite a few of your posts and saw that you've used/tested using a Pi Raspberry, Arduino, and a Homeseer setup to do much the same thing as I want to.  From your perspective, which system would you recommend based on your research.  Right now I'm leaning to using a...

I want to do exactly what JonW is suggesting.  The built in log for the OmniPro II only stores 250 events and doesn't record the data which is what I want to do for the different thermostat temperatures.  JonW, if you could tell me what I would need to get started, I am assuming you are using a...

I have a OmniPro II system installed with 20+ thermostats.  I want to download the system run time per week from each thermostat, the outside temperature and the thermostat setting temperatures.  I want to know the best way to get this data and display it.  I know some have used arduino's but...

Hey guys, I was wondering how to reset a Ademco Vista 50P panel to its factory defaults. I just want to erase all codes and custom words from the panel. I know there is a easy way to do this but am having trouble figuring it out. Thanks for your help.

Cornutt is right, I have no neutral going to the switch box the neutral is up at the light location. The electrician only has a 2-conductor cable + ground to the switch junction box. I do think that the triac is out on the SA US240 becuase I had an extra HAI switch laying around and that will...

Yes, that is what I have is a switch leg wiring. At the switch which is a double gang, I have two lights each on a different circuit, and it would be easy for me to take the neutral wire from the other switch. I do not want to have a code violation, as this house has new wiring that is only...

I have it wired the way that you say, black on the switch to black on the light, and white on the light to brown on the switch, grounds to ground, but I don't have a neutral on that circuit, I'm using a neutral from a different circuit. Am I able to do that?

This may seem like a very basic question and I hope that someone out there can help me. I would like to know how to wire a Simply Automated US2-40 light switch to a light. The light is where all of the wiring is connected so I have just two wire and a ground coming from the light to the...