Recent content by IndyBrian

Thanks for the reply, always nice to see good customer support these days.   My non computer programming brain just thought since the OmnPro is able to emulate the Russound UNO-S2 keypad on the Omni Touch 5.7  all of the required data from the iPod was there.   I just hate the way you have to go...

If you are still in the prewire stage I recommend looking at Centralite for lighting control.

First wanted to say that I love the Haiku app so far.   Russound CAV 6.6 with iBridge Dock Kit and hooked up to OmniPro II.     My question is there any plan to improve the controllability of an iPod plugged into a Russound iPod dock?   The Haiku app is great in that it displays the MET Data...

Update after talking to Centralite.   First off tech support at Centralite is great!!  Very Professional and willing to help.   Second to PICTA thanks for trying to help me on Sunday when I posted.   The documentation on the Centralite website for LiteJet and OmniPro integration is not as new a...

After you mentioned your dedicated programming port, I started searching again and also read that document.  One of the install documents mentions using DIP switch #8 when you use the DIP switches with the old firmware to set the baud rate.  With the new firmware baud rate is set with the...

LiteJet 48 has two RS232 ports on the board in each box.  Port #2 connects box #1 to box #2 on each board.   You have to connect to the #1 RS232 port in box #1 to program both units.   I just tried to connect on #1 RS232 port from box #2 and same result, no communication.   I am sure it is...

I was going to try that next, but that requires a trip to the store, Unit #2 is on the other side of the house, I need a longer RJ11 cable.

I have two Water Furnace Geo-Thermal units each running two zones.   I have an OmniPro II, and I have four HAI Omnistat Thermostats.  I am pretty sure these are no longer made and the new one is the Omnistat 2.

Yes and HC 1-16 set to Centralite, verified in PC Access and from the key pad.

Yes I have reset the baud rate to 9600 on the LiteJet per the instructions, and OmniPro is set to 9600 by default.   I have my Russound communicating with the OmniPro on serial #1 so I switched it to Serial #2 to make sure it was working.  I also tested both cables and DB9 serial connectors on...

Hello,   I have done an exhaustive internet search and since it is Sunday no tech support available, and I need a little help.   There is a good thread on here about Centralite and Omni integration, but it did not solve my issue.   I am trying to hook my LiteJet 48 to the Omnipro II, but I can...