Recent content by kurtisdigital

Hey Tigers -   I got my Arduino to communicate with my OP2 via the serial port, using the "pro link" protocol and just sending ASCII text messages back and forth.   This is not nearly as cool as what you were trying to do but it's a bit better then tying the two together using relays / zones /...

Ok everyone - I have answered my own question and I am making the post to help anyone who might run across a simillar problem. The problem was the firmwear on the Vizia RS232 Serial device. I had read about this causing problems, but did not think this was causing my problem because the firmwear...

Hi Everyone - I have the Vizia RF hooked up and working with my HAI Pannel (next to my 80 some UPB devies) -- one thing I am having trouble with is 2 way status tracking. I used the USB stick radio to program the network and I did complete the RS232 to device associassions. I have each device...

Ok - so I figured this problem out and I figured I would post a "reply" to my own post, just in case anyone else runs across the same problem and happens upon this "thread" :) So, it turns out that HAI has two serial port settings for Russound. One is just Russound (which is what mine was set...

Hello Everyone - First of all - I LOVE Cocoon Tech. Best HA forum ever. Ok, with that out of the way, I have hit a big road block with in using my HAI OmniTouch 5.7e keypads to control my Russound MCA-C5 system. I was able to configure the two systems and get them talking - and the integration...

Can anyone help me?? - about 2 months ago I bought a Pronto 9400 and a 9800 on Ebay. Before I bought them - I made sure I could access the software from Philips and was registered on their site. I have pronto edit and I can make it work but what I REALLY NEED is the HAI libraries / files for...