Recent content by mtmtntop

you are right, it does not say it is a 1 wire device, and i really didn't know what t actually makes a device work on  a 1 wire network.  thus my question.  Thanks for that reference material from midon.  I had never come across that before.  I do know there is at least 1 manufacturer making a...

i need a current sensor to monitor a radon fan.  i have an existing 1 wire network.  If i cut off the plug on this device: http://www.robotshop.com/seeedstudio-non-invasive-ac-current-sensor-30a-max.html?utm_source=google&utm_medium=base&utm_campaign=jos   and wire into the correct pins, will it...

i downloaded the ds2408 data sheet and the commands for each input and output are on that sheet.    http://www.digchip.com/datasheets/parts/datasheet/280/DS2408.php for once, i seem to have found the answer myself.  thanks for the help, it set me off in the right direction.  eric, is there any...

thanks.  that gave me the address to the board itself.  any ideas of how you find each individual relay?  and you were correct, logtemp does not yet support ds2408.  i went back to the logtemp screen print  i had seen and it was for an alarm triggering a ds2405.  i am still looking for options...

i have had a 1 wire network up and running for several years gathering data for my solar array and related parts.  i also have a hobby boards 8 channel i/o board in the network.  i never got around to using this yet, and use it only to supply power to the network.    yesterday i was looking at...

mine is running on parasitic, so j1 is not installed had a look inside and all looks great inside.

i got the combined unit ds2438 that measures solar, temp and humidity earlier this year and use it to monitor a room in a greenhouse. it worked fine from the minute i plugged it in. now i find i am only getting the temp from it. i have another DS18s20 sensor plugged into the ds2438 and am...

i did think the board would recognize 1 wire devices, but i have gotten around that issue by making my own hub. I still have 5 hvac zone valves (hot water heat system) i want to know the open or closed state which i will determine via their end switches. But I wanted to be able to monitor if...

just want to make sure i understand this board. can i attach any 1 wire device as an input and have the network read that device? i have 2 devices attached as inputs, and 1 is powered an one is not powered. both of these worked in a different wiring setup. now, neither of these devices...

i had a similar problem with various 1 wire devices connected. Some would stay, some would come and go but usually would come back. I switched to logtemp and the problem disappeared. everything in the network was immediately recognized and the whole thing was stable. not sure what the...

i used your link and loaded the 1wirestatus. i don't see a place where i can have it check usb ports. is there a switch in there somewhere? thanks alot for your help with this. i like the looks of this app as i have a bunch of things i need to do that are related to the time of sunrise and...

hmm. well i kind of understand part of what you posted. i think my problem is that i am not (yet) a programmer person but figured i could learn it to do what i needed when i figure out what language i am going to need. i am looking at mr house but am having trouble getting that to install...

i finally got my 1 wire network to work, using 1 wireviewer. i got a temp/humidity/solar board from hobby boards. i can see the data from the temp and humidity sensors. i can't see the solar data. i e mailed them to find out how to see the solar data. here is the answer i got: The humidity...

i did get this working after e mailing maxim. they gave me step by step instructions, and i abandoned the serial port connection and just went with usb. now it works, but i have another problem i am just about to start a thread on . can't figure out how to see solar data with hobby boards...