Recent content by mwertheim

I have tried every combination I can think of and I can't get the Trouble Output 2 message to go away. I bought new resistors from RS (2.2k 1/2 watt) and put it across the +/- on the terminal block. I bought an Elk 30 Watt speaker and hooked that up, still have the trouble signal. Anyone have...

I think I'm learning that you're right. As you can tell I'm just starting my Elk journey, but can quickly see why so many add in HA software to fill in the holes. In fairness to Elk though I guess it can't be all things to all people but the email reporting and options certainly could use some...

Thank you for the reply. I believe from all I've read it should be a 2.2k resistor. I'll get a new resistor from RS and see if it solves the output 2 issue. A quick update on the email problem - I found that if I switched to port 80 for my smtp server (which is hosted through GoDaddy...

Do you have a speaker hooked up as well or just the resistor? I have the global option set to siren since it's a speaker.

Ok but I do have a speaker hooked up to Output 2. It's the Elk-44 which is a 30 watt 8 ohm speaker. Sorry if I'm misunderstanding your guidance. It still reports Trouble Output 2 with event 1142 Output 2 Supervisory Trouble in the log.

Thanks for the reply - the manual says if I'm NOT using a speaker on output 2 then use a resistor. So I should put a 2.2K resistor on the terminals along with the wires then? I found my answer to the keypad alert problem when opening the door when the system is armed. In RP I had the key...

Output 2 is set to siren. I've rebooted the system several times and no luck yet on getting a warning to disable the alarm. What software solution are you using to generate emails for Elk events. After getting the security portion smoothed out I want to move on to more automation stuff. Thx.

So after finally buying all the pieces parts, learning how to wire CAT5e, etc. my system is almost up. There are 2 things that I can't figure out so hopefully someone can help. First is the keypad is telling me 'Trouble Output 2'. I have tried all combinations to fix this but so far no luck...

I'm using 2.0.8 I think that's the latest one correct?

I found that if I exit out of RP completely and then reconnect it will detect the change and then I can import the wireless data to the database. Solved for now.

Ok so I made the jump and got a M1 Gold. I have the M1KP2, M1XRF2G, and M1XEP. I have these setup on a test bench. I have the M1XRF setup on group 5. I've created a wireless group 5 in RP. I can enroll the sensor through the keypad and get confirmation that it's enrolled. I then try to...