Recent content by priorityelectric

I had the problem one time with one switch. Kinda freaky. I thought the house was haunted. It was way back when I had GEN 1 upb. Replaced the switch no more problem. I had so much automation in the house at the time I thought that the other automation may have something to do with it. When I...

actually you can program the double tap to be any scene you wish. I have set up functions in homes that if you double tap an exterior light every exterior light will go on,... or off I have set up a scene if you double tap the switch at the top of the stairs it will turn on the lights downstairs...

try this filter http://www.x10-switchlinc-smarthome-upb.com/xpf.html while x10 is 120 khz and insteon is 135 khz the filter should work the same for the noise on the powerline. It is the best bet at this time for insteon noise.

The panels wire into the inverters and then to the electrical panel. in between the inverters and the electric panel there should be a disconnect. The proper location for the filter would be between the disconnect and the panel, thus being able to work on it with power off. Turn disconnect off...

I would go with UPB gen 2 That home automation works!

I use inline dual filters with inline fuses! Ya have to make it.

I have solved this dozens of times to filter out the inverters. Have an electrician filter your inverters after your inverters and before your electric panel. use fuseable links with xpf filters. xpf filters are rated at 20 amps. I wired in 15 amp in line fuses and then a filter on each power...

Its my understanding that the hd11a is basically the CM11a. As for the 2414u is a replacement for the 1132cu. take a look and see for yourself.

Having everything trying to repeat is OK if it is only one command. If it is a string of commands you will be in trouble. If you email me I will get you the place I get my Switchlinc from. Its online They have most of the switchlinc switches in stock. I am sure you you type in the part number...

Sounds like GEN 1 UPB or SA UPB and more than likely a SURGE. I would replace the UPS if you still use it at all. I would also consider GEN 2 UPB by PCS pulseworx The reason no noise level is it is not noise it is attenuation aka signal suck.

Having phase couplers at all panels is a necessity. Using PCS SPR-1 may help as well. Using PCS GEN 2 devices would answer all of your problems. Only one noise problem so far - a panasonic microwave with the name inverter in it while it is running. Ya they make a filter for it as well. In my...

Your switch is in dimming mode as opposed to switch Instant mode. Program it asap before you have big problems like a fire dimming a FL light.

In answer to your question UPB Parts single pole switches - PCS Pulseworx switches WS1D-6 for the 3 way applications. use a WS1D-6 and a RWS combination for each 3 way set up you will need to download the software to your computer UPSTART there is also an application to make it work from...

How to train a cat,... Home automation style get a couple of X10 Motion sensors battery operated. you can attach them low on the wall on the entry. you will need a receiver as well. then something that will drive the cats out fast kinda scare them so they bolt each time and never go back. disco...

Yes use the PCS Pulseworx GEN 2 appliance module. Quieter than the x 10. works well. Pulseworx AM1-12