Recent content by Snap_75

Does anyone know where to find firmware files for the OmniTouch 5.7? I visited the HAI download page for the interfaces but could only find firmware for the OmniTouch 5.7e. Thanks in advance for any help, Samer

Look at this thread on CQC's Forums: EDT iLine Thread There are pictures of an installation that was done with all load control in a central location. looks nice but a lot of wire pulling! Samer

These are DIN rail mountable terminal strips that you can get internal jumpers. Altech Terminal Block Page Allied is usually cheaper than Grainger, just no local wharehouses... You may also want to search for terminal blocks on Newark Electric's website.

v1rtu0s1ty You could use the one pictured and jumper each one as has been said or you might want to look into something like this: Terminal Blocks you then would need to get the center connector jumpers: Jumpers You can cut the jumpers to any number of poles you want. These terminal blocks...

Cool, keep us up to date on how the integration goes! Good Luck!! Samer

Bob, Take this with a grain of salt because of my lack of experience in home automation, but I would say just hooking the lighting control to your ELK would be sufficient enough to do all the control you need. You can program scenes (basically a macro you program using the ION-MB) then use the...

elcano, The term architectural refers to the layout of the switches/buttons, dimmers, and controller. I’m not sure if it is the proper term for it (I read about in a home automation mag and have seen it used on some websites) but it is used when the inputs (switches/buttons) are wired back to...

That looks pretty cool. It is a true architectural system and it looks like it utilizes CAN as the communication protocol which is usually very robust and reliable two way communications. CAN is used in some industrial serial communications such as DeviceNET where the speed and reliability of...

pkarakis, With that install you did, did you sign the dealer form? Or did you just buy from another dealer? I know that anybody can buy direct from EDT but I noticed in the 2006 catalog that some of the items are sold only to Pro/Elite Dealers. in the catalog, I found the following: Pricing...

Bob, I have limited experience with the ILine Switches (dimmers and relays) and the multi button scene controller. The Dimmer and Relay switches behave just like the X10 modules. Tap up for ON, tap down for OFF, and push and hold for dimming. Double tap up for 100% on and double tap down for...

This is from EDT's (another hardwired solution that daisy chains CAT5 to each load controller) website. As long as the jacket insulation on the CAT5 cable is rated 250V, there shouldn't be a problem. Also, it looks like there is a stipulation on the proximity of exposed conductors between the...