Looking for a PCAccess programmer

[Powercat80]

I need some help with my lighting features on my OmniPro-II.  I have determined it is not a PIM or Phase Coupler issue, but something haywire in the lighting programming.  Thermostats and Security work fine.  I am happy to pay a reasonable rate to diagnose and repair this glitch.  And I think it can be done remotely.  Altgough, I live in Austin Texas, so if you are local that would be great, but not required.
 
I will provide full detail to those that may be interested.
 
 

 

[HogarDigital]

What is the main problem you have with lighting?
 
why do you think is a programing issue?

 

[Powercat80]

I have eliminated any phase coupler or noise issues and have confirmed that the PIM is working.  I can turn on the first light in the series, but then none after.  The other quirk, when I turn on the the "Wine Room" light the Powder Room comes on instead.

 

[Powercat80]

After receiving some technical assistance, it may very well be the PIM.  So I have one on order just to eliminate that potential.  Hopefully that will fix it.

 

[LQtechvn]

I have eliminated any phase coupler or noise issues and have confirmed that the PIM is working.  I can turn on the first light in the series, but then none after.  The other quirk, when I turn on the the "Wine Room" light the Powder Room comes on instead.

 
No noise can make it. The address assigned to light switch and PC access was wrong. 

 

[HogarDigital]

My recommendation is to factory reset the PIM and all the 35A00 switches and start enrolling thru PC ACCESS, so will be able to right adress all the lights