networkcrasher
Active Member
Does anyone have any experience with an ELK PD9 seemingly resetting and setting off an OmniPro II? I have 6 of the outputs hooked up to motions and galss breaks, and up until today, it's worked great. Today, I've had 2 instances where the alarm has gone off, seemingly because the PD9 is having issues.
8/11 at 12:41 PM Security Disarmed by Mark
8/11 at 12:37 PM Burglary alarm activated
8/11 at 12:37 PM Basement Motion tripped
8/11 at 12:37 PM Kit Glass Break tripped
8/11 at 12:37 PM Kitchen Motion tripped
8/11 at 12:37 PM Foyer Glass Brk tripped
8/11 at 12:37 PM Base Glass Brk tripped
8/11 at 12:37 PM Front Dr Motion tripped
8/11 at 12:01 PM Alarm reset
8/11 at 11:55 AM Burglary alarm activated
8/11 at 11:55 AM Basement Motion tripped
8/11 at 11:55 AM Kit Glass Break tripped
8/11 at 11:55 AM Kitchen Motion tripped
8/11 at 11:55 AM Foyer Glass Brk tripped
8/11 at 11:55 AM Base Glass Brk tripped
8/11 at 11:55 AM Front Dr Motion tripped
8/11 at 9:08 AM Security Armed Away by Quick Arm
Obviously it's pretty tough to trip all of these items at the same time, and they all happen to be hooked up to my PD9. They are all also hooked up to a zone input expander on my Omni, but nothing else on the expander tripped - just items requiring power.
It's actually a PD9HC, not that it may matter. Both the Omni and the PD9 are hooked up to the same input transformer. I just wanted to isolate the current requirements of these sensors outside of the Omni's power outputs.
8/11 at 12:41 PM Security Disarmed by Mark
8/11 at 12:37 PM Burglary alarm activated
8/11 at 12:37 PM Basement Motion tripped
8/11 at 12:37 PM Kit Glass Break tripped
8/11 at 12:37 PM Kitchen Motion tripped
8/11 at 12:37 PM Foyer Glass Brk tripped
8/11 at 12:37 PM Base Glass Brk tripped
8/11 at 12:37 PM Front Dr Motion tripped
8/11 at 12:01 PM Alarm reset
8/11 at 11:55 AM Burglary alarm activated
8/11 at 11:55 AM Basement Motion tripped
8/11 at 11:55 AM Kit Glass Break tripped
8/11 at 11:55 AM Kitchen Motion tripped
8/11 at 11:55 AM Foyer Glass Brk tripped
8/11 at 11:55 AM Base Glass Brk tripped
8/11 at 11:55 AM Front Dr Motion tripped
8/11 at 9:08 AM Security Armed Away by Quick Arm
Obviously it's pretty tough to trip all of these items at the same time, and they all happen to be hooked up to my PD9. They are all also hooked up to a zone input expander on my Omni, but nothing else on the expander tripped - just items requiring power.
It's actually a PD9HC, not that it may matter. Both the Omni and the PD9 are hooked up to the same input transformer. I just wanted to isolate the current requirements of these sensors outside of the Omni's power outputs.