I am in disbelief. I reconnected the board and let it sit for 24 hours- no problem. Uploaded the old configuration and within half an hour, started to get the battery low message again. I changed the battery and I updated the firmware to 4.0b and got a voltage reading of 225 but 2 days later, still getting this message with a reading of 231.
Awaiting a response from HAI support at this point.
Wondering if it could be something in the config that has caused this..?
followup: I see that the battery in the expansion enclosure is reading 34. Have swapped it with no success. Thinking that maybe this board is also faulty/blown...