Hi- A couple years back I moved into a house with a ONQ fire/security system HMS 1100 installed. Recently the fire alarm system has stopped working. I have no experience with this type of system so I am looking for a little help.....
The smoke detectors activate when tested with a smoke can (the red activation light shows on the smoke detector) but no alarm sounds.
When I check the event log on the console it does not show any alarm event (but seems to record every other system event)
I have tested the alarm horn itself and it works fine (using the test function from the console)
The console is showing the "ok? status
I located the input cable from the smoke detectors and they are all connected to the controller and not loose.
Anyone have ideas what might be wrong?
thanks
Paul
The smoke detectors activate when tested with a smoke can (the red activation light shows on the smoke detector) but no alarm sounds.
When I check the event log on the console it does not show any alarm event (but seems to record every other system event)
I have tested the alarm horn itself and it works fine (using the test function from the console)
The console is showing the "ok? status
I located the input cable from the smoke detectors and they are all connected to the controller and not loose.
Anyone have ideas what might be wrong?
thanks
Paul