Recent content by grawil

I too had hoped the Omni series would survive. I've been contemplating a few upgrades (relay board) and RFID access and I'm on the fence as to whether I'll go ahead or look for alternatives.

I have upstart and I've used it to make minor modifications to the switch settings (i.e. single/double tap, Report light level after rocker switch is pressed) but nothing more at this point. I've not played with 'links' in either upstart or PCA.   I found some info on the Simply Automated...

Excellent. I just installed some new UPB switches and have not played with the 'links' yet.   Can anyone describe in more detail how to set this up in upstart/pca?

Does anyone have an elegant way to gradually increase the light level over a period of 10 minutes in an automation block? The idea is to turn on the bedroom lights in my kids room gradually when their alarm starts in an effort to get them to wake...

Thanks for the info Ano. Unfortunately, I suffer through cold, dry and dark Canadian winters. I have a humidifier to install on the furnace when I return from vacation that will be connected to my omnistat2. In the summer, I use my A/C to de-humidify.   With the relays, I'll be able to bring in...

Can anyone confirm if I can connect a 4 or 8 relay module to an OmniLTe board? The documentation doesn't specifically mention the LTe board (Omni, Omni II, OmniPro, or 17A00-1 expansion board are listed).   I'm looking to automate the switching of my HRV system. I wish there were another set of...

If the app has been removed from the app store then you'll need to troll the web for a copy of the ipa file. Installing from the ipa will require jailbreaking or resigning the app. I'm interested in finding a copy of this as well :(

Unfortunately, those 'options' are for PC Access to locate and communicate with the Omni board. This is true of all of the settings in the 'options' menu.  They are not sent/uploaded to the board so you cannot use them to change the IP, port or encryption keys. In the same way, if you...

Thanks guys. I was actually trolling ebay last night for console's last night and noticed this as well. Unfortunately, by the time I include shipping, taxes and CAD-US exchange, that $40 console isn't far off the cost of a new one locally. My original plan was to use mobile devices and an...

  As I said, I can do this. PCA via serial works fine.     Unfortunately, no. According to Leviton, you cannot download the current network configuration (IP address, port number or encryption keys) from the Omni board using PCA. You can set the IP, port and encryption keys under the 'options'...

My understanding is that none of the serial ports support encrypted communication, even the serial console. Once I have a console, I'll confirm and sniff the rs232 line to see what is exchanged when the IP/keys are viewed. I figure if you have physical access to the Omni board and can physically...

Exchanged emails with Leviton support. It is not possible to view/set the IP address or encryption keys from PCA, even when connected via a serial port.

I can connect with PCA via the serial port. However, I still want to view/change the IP address and view/change the encryption keys. Are these fields accessible from PCA?

So I now have a licensed copy of PCA and a serial cable. Unfortunately, I cannot see the two encryption codes anywhere.   Does anyone know if there any way to read these from the controller other than purchasing a serial console? Can I retrieve these by sending a command? I can find the place...

  Thanks, this is another layer of automation that I'd like to add to my setup as well.   Cheers, Graham