Recent content by iceverything

Thanks Picta for all of your help.  This was exactly the issue.  Just to recap for those having the same issue in the future.   1) Register the Elk Serial port with a dedicated address 2) Make sure Baud rate is 9600 and the jumper is set to RS232 3) Connect the URTSI from Somfy and get it talk...

I never received a rs232 cable from Somfy.  I have reached out to them but in the mean time I figured it would be just as easy to wire it up here.  I have changed the jumper to RS232 on the M1XSP.  I believe by looking at the two documents you sent me Pin 2 is the RXD.  Pin 3 is the TXD and Pin...

so what is the pinout then for the serial port.  I am a little confused on which wires I need to put into the ethernet plug to get the wiring to communicate

This is probably the issue.  So with the ELK came a serial to ethernet adapter which then I plugged that in and didnt think twice about it.  I guess my next question would be is what is the pin out for the serial port on the M1XSP. 

How do I program a somfy shade into my system?   Currently I have 1) a M1XSP that is enrolled into address 1.  2) The firmware is set to standard firmware 1.0.50  3)I have wrote an ASCII string of 0103U<cr> to make the shade on channel 3 go up.  4) I am using a Somfy Universal RTS RS485 port...

I have been a member of this forum for about 10 years.  Since then I have built up a fairly decent amount of devices.  I have 25 UPB switches and 10 outlets along with wired motion and wireless sensors for windows and lastly plenty of security cameras.   For the longest time I had an HAI/Leviton...

Thanks Pete. My data wire worked its way lose so it was making intermittent contact

Not sure if my panel needs to be replaced or if I was unlucky enough to have a console go bad kind of quick. Anyway one of my consoles periodically beeps 3 times and display Button 333. I cleared out the code restarted the system and also reset RAM on my system. It is only happening at one...

I agree with Ano.  I would use a flag. Timed 6:20 AM MTWTFSS        Then Driveway Sensor Flag on Timed 5:30 AM MTWTFSS        Then Driveway Sensor Flag off When Driveway Sensor Zone NOT READY         And if Driveway Sensor Flag on         Then Show Car on Driveway with Beep    

I work in the ophthalmology industry.  Pete if you are happy with what you found on the internet then stay with your decision.  PD is just the distance between the center of your pupils.  The eye industry uses metric so you can either get a plastic metric ruler or you can use an imperial ruler...

What am I missing?  I have intermittent issues with connecting my pc or the Leviton Snaplink HAI app on my phone with the OPII board.  Proximity is not an issue because I could be upstairs or right next to the board which is next to my wireless router.  The IP address is set for static but when...

Yes I was able to connect via a serial port because the network connection is oddly hit and miss.  Is my best option to go back to 3.11?

I have updated to 3.13 when it came out.  This problem only started when I lost power to the house.  So it has to be caused by that.

I have also the Haiku app and can not connect either.  I tried clearing out my settings and enter anything again but still no luck

So I am at my wits end here.  About 2 weeks ago I lost power at my house.  Since then I have unable to get both of my touchscreens to work for any length of time.  Let me give you some history.  I am running 2 touchscreens with Automation studio in the simulator mode.  The reason why I did this...