Recent content by lvrouter

Wow, first the UGLY update that completely ruins the application for my use.  It was so perfect on wall-mounted iPads with the dark interface, this new "light interface" is ugly on the eyes, difficult to see and completely inconsistent with any UX guidelines I've seen.  Why it couldn't be an...

Well it's been over a year now with this problem and no resolution.  The system remains in a "minimum configuration" mode, all relays have been disconnected permanently (from the board), the expansion chassis was removed, just running now on the basic OP2 system.  Did I mention it's a BRAND NEW...

The challenge with disconnecting the network cable is that I then have NO WAY to know of the reset (short of looking at the logs later) but more importantly I lose basically all control over my system (I use iPads, iPhones for most things).   The network is VERY clean, I've tried it on the main...

So, here we are two months later and my brand new system is STILL resetting daily.  Hasn't created any major issues but it's annoying and sometimes interrupts a programmed event (based on timing).   I've "simplified" my entire installation, stripped it down to the basics and the problem...

The GE simply has 8 outputs that are wired to 8 zones on the HAI.  I put it in before I HAI released their version which, I believe, simply connects like a panel.  It's use for non-alarm zones, specifically it monitors the four garage doors (open or closed) and a couple of panic buttons (used...

Thanks for the replies, the adventure continues.  To clarify, I do have a LOT of scripts (over 1,400 lines of code) but I did a test with an EPROM clear, and restored everything with NO programming.  It reset within a couple of hours.   The wireless receiver is connected to 6 zones (it's a GE...

I have about 45 zones, mostly doors/windows, a GE wireless interface with 8 zones (not the HAI kind), six HAI thermostats (5 old style, 1 new style), six panels (1 old style, 5 new style), 1 external bell, 1 internal horn, 18 2-wire smoke detectors (all on a single alarm panel input), 1 4 wire...

Well this is certainly very frustrating.  After disconnecting everything that I thought was suspicious, trying alternate power supplies and batteries, reseting, clearing RAM, EPROM, multiple times, running without programming, trying alternate power sources, and every other thing I could think...

Update: Since I have two batteries, two power supplies (main and for the expansion chassis), I've tried a few more things, none of which have helped: swapped the batteries, swapped the power supplies, connected both power supplies to a filtered UPS, ran without the batteries, nothing fixed it. ...

So you believe it to be power related?  I have unplugged and forced resets this way but the problem returns.  Batteries are about 18 months old (one in main box, one in expansion chassis) and show 200+ on the status displays which I'm told is good.   My concern is spending well over a $1,000 to...

I'm having a serious problem with my OmniPro II experiencing random "resets".  Log shows "System Reset".  I've contacted HAI but haven't received anything useful.  I understand that the resets do happen occassionally but I'm experiencing several (2 to 5) per day now with NO pattern.  Armed...