Recent content by MJoyce

Yes, sorry I meant +12v not +5. :)

I've connected external power from my pc +5v to a hobby board barometer via the internal terminal screws. Does this supply power to the entire 1wire network ? I have existing devices (aag v3 + rain gauge), I vaguely remember something about the connections being different for these, I'm...

please can someone add a link to the post mentioned ?

Yes, thanks for your help, I used power from the PC and I get readings. I'm not sure how to interpret them though. Here's what OWFS has to say : up directory HIH4000 HIH4000 HTM1735 HTM1735 Ienable MultiSensor MultiSensor VAD 4.97 VDD 4.93 address 26ABDDAE000000CB crc8 CB date disconnect...

I rebuilt OWFS on a different PC (before I was using a NLSU2) and now when I connect it I can still see the adaptor. Regarding power, can I use the +12v from a PC power supply ?

Yes, I've tried the barometer on it's own, and the adapter device disappears from the network. I didn't realize the barometer needed power, I should have read properly. I'll oerder a power injector or hub, but I'm worried that the barometer is broken and I'll be throwing good money after bad...

I'm was just using a standard RJ11-RJ11 cable. It only has two wires, and they look to be the centre pair. I cut it and twisted the pair and the humidity/temp/solar module appear. Using owfs... top highest level directory structure structure directory bus.0 bus.0 directory uncached uncached...

Hi all, I recently took delivery of a HB barometer and humidity/temp/solar modules. I have a Nslu2 running owfs, usb adaptor and it detect a ds1820 I rigged up. When I connect either of the new modules, both the existing ds1820 and the usb adaptor disappear from the device bus, the new...