Anybody interested in WebControl BRE web GUI source

[pepetrueno99]

Which Amazon link do you use to buy the PLC version? Didn't realize they sold via Amazon.

here we go:

http://www.amazon.com/gp/product/B001H4JXLU/ref=ox_sc_act_title_8?ie=UTF8&m=A28525P0S5ZVJ3

 

[tparvais]

We still ship new boards with BRE firmware. The HTML part is same for HW rev 2.0.2 and 2.2.2.
Attached is the zipped HTML source code. You will need to download Microchip MPFS utility which is part of their application package.
After create the image, use DOS FTP to the BRE boards.
If anybody likes to post modified GUI, to share your creativity with this board, you are welcome to post modified code here.

Hello

Do you think it will be possible to publish Plc HTML source code ?
I have release 3.00.07 release

Thank you

 

[CAI_Support]

Hi Thomas,

We don't have plan to release the PLC html source at this time. The PLC html code is tightly coupled with the firmware code, if user mixing up different hardware or firmware, it will not work. Firmware 3.00.07 firmware runs on the older 2.0.2 hardware board, it is the oldest firmware releases for PLC logic. Since then we have made 3.01.13 latest firmware for the 2.0.2 hardware board. 3.01.13 firmware incorporated all the changes of latest firmware, less the counter and frequency counter feature, due to its CPU is less capable. For hardware 2.2.2 rev board, the firmware starts with 3.02.xy. The latest firmware on the 2.2.2 hw rev board is 3.02.15.

If user does not have knowledge of how internal PLC firmware changed, he could not modify the html code to make it work together.

Thanks for using WebControl.

 

[BTCAD]

Hi is it possible to share the webpages file package (PLC version). I want to rebuild pages from the original.
 
 
Thx in advance!

 

[CAI_Support]

PLC web GUI is tightly coupled with firmware.  Each version firmware must have matching GUI code.  Sorry that is not available for downloading.  We do offer paid services for altering web GUI with your HTML or logo on it, at time and material cost, without providing you with the source, rather boards loaded with your version firmware and GUI.  Once that is developed, you can reorder boards loaded with that without paying additional charges.