You probably need to sign up with some kind of dynamic DNS services for your dynamic IP address.Hello, thanks for your reply, yes that's right a remote computer or mobile phone (nokia E5) with internet access to view the status of the inputs and control the outputs.
I have the webcontrol board working fine from within my home network
Hi fwd03 !
Thanks for your answer.
My firmware no. is v03.01.04. I am able to control the TTL outputs and read inputs,
but not set the VAR.
There is a comment in the FAQ.....
"Command line browser wget can be used to do manually control. The above lines maybe need in double quotes to work."
I am not shure that I understand what they mean ?
You probably need to sign up with some kind of dynamic DNS services for your dynamic IP address.
I never used it myself, but you can try this: http://www.dnsexit.com/ or http://www.no-ip.com/
I think you will need to have the router with firmware support dynamic DNS, then you can access your home WebControl through the router enabled services.
Hi Cai, Thank you for your email, and your help, as always. Basically on the Saturday and Sunday "Weekend" I need the heat temperature control to be a bit different, as more people are at home. On Saturday morning at midnight the heat temperature can be the same as weekedays But at 7:00 AM then the heat would turn on at 725 and turn off at 728 (for example, I will make final adjustments when this is working) Then basically stay the same until midnight (Sunday) where it would drop down again as per the same as weekday at midnight. Then Sunday at 7:00 AM, do the same as Saturday, again until midnight, where it would do the same as every midnight, weekdays) How can I make this happen for the Weekend (Sat and Sun?
What's the odds of seeing a sample of the programming for this?Don't forget humidity scaling to reduce humidifier settings as the outdoor temperature drops in order to prevent condensation on windows from causing rot/mold problems.