Gate lock suggestions

[signal15]

I'm having an iron fence with 3 gates built for my yard. Any suggestions on locks for the gates?

One will rarely be used. Another one will be used mostly for just getting the mower between the backyard and the front. But the 3rd one is going to be an 8 foot high scary chop-your-fingers off monstrosity on the side of the garage. You'll have to go through this first when entering the service door on the garage.

My thought is a standard latch with a combo padlock on it for the rarely used gate. A mechanical code lock for the mower gate. And either a mechanical or some sort of electronic lock for the service entry gate. I'm not averse to putting a door strike in that one for future use.

Anyone else been through this? I need to get the lock specs to the fence builder so he can build the gates appropriately.

 

[fabriziojoe]

I'm having an iron fence with 3 gates built for my yard. Any suggestions on locks for the gates?

One will rarely be used. Another one will be used mostly for just getting the mower between the backyard and the front. But the 3rd one is going to be an 8 foot high scary chop-your-fingers off monstrosity on the side of the garage. You'll have to go through this first when entering the service door on the garage.

My thought is a standard latch with a combo padlock on it for the rarely used gate. A mechanical code lock for the mower gate. And either a mechanical or some sort of electronic lock for the service entry gate. I'm not averse to putting a door strike in that one for future use.

Anyone else been through this? I need to get the lock specs to the fence builder so he can build the gates appropriately.

Hi,
Check out http://www.kingmetals.com/ they have anything you could ever want for building an iron fence.
The link for the gate hardware is here

 

[signal15]

Does anyone have any lock suggestions?

 

[Jreigner]

Does anyone have any lock suggestions?

http://www.securitron.com/en/site/securitr...nd-Accessories/

I have done many an assisted living facility using these outdoors.

 

[signal15]

Does anyone have any lock suggestions?

http://www.securitron.com/en/site/securitr...nd-Accessories/

I have done many an assisted living facility using these outdoors.

Most of this stuff looks like gate locks and latches for vehicle gates. I need something with either an electronic or mechanical keypad on it. I didn't see anything on their site. Plus, their control units are expensive. I'd be integrating this with an ELK M1 for a door strike.

I'm thinking a Unison style lock is probably the way to go about it, unless someone has a good reason not to use these.

 

[gatchel]

Does anyone have any lock suggestions?

http://www.securitron.com/en/site/securitr...nd-Accessories/

I have done many an assisted living facility using these outdoors.

I have also used the securitron mag locks. They work well. Someone makes a special gate strike, also. I will look and see what I can find. It's been a long time since I've used them.