Interlogix NX-148E

[kamyotte]

Hi, I have a local security company come in and install the NX148E Security system 3 days ago. It came with the NX-148E-RF Keypad. They told me that if i wanted to be able to control the system from my iPhone, Such as disarming it or arming it, I would have to buy a part for it. I was wondering if someone could tell me what this part is and maybe where i could get it. He quoted me a price of 300 but i would rather buy it my self if i can. Does ANY one know where i can find one. Im using a UL Monitoring Station from them as well. Thanks!!

 

[RAL]

The NX148E is the keypad.  You need to know what the model of the alarm panel is (e.g. NX8E).
 
Even if you buy the additional module yourself, you will not be able to add it to the system unless you have the master (installer) code to gain access to the configuration menus of the panel.  Did your alarm company provide you with this code?

 

[kamyotte]

No they didn't, I know the 2 guys that own the company and I'm happy to support them. The mMonitoring is dirt cheap, Being at 10.00 a month with cell service, As far as i know, this is the kit we have http://www.smarthome.com/ge-security-nx-8-fast-pack-with-nx-148e-rf-lcd-keypad.html. Not sure what else. 

 

[kamyotte]

Not the sensors, just the keypad and the part that holds everything.

 

[RAL]

No they didn't, I know the 2 guys that own the company and I'm happy to support them. The mMonitoring is dirt cheap, Being at 10.00 a month with cell service, As far as i know, this is the kit we have http://www.smarthome.com/ge-security-nx-8-fast-pack-with-nx-148e-rf-lcd-keypad.html. Not sure what else. 

 
I'm far from an expert on the NX-8, but did a lot of reading on the NX series when I was deciding what alarm panel to buy.  To connect the NX-8V2 to the internet, you would add the NX-590NE Internet Interface module to the system.  You can buy this for about $200, so if the $300 price includes installation and configuration, that's a very reasonable price.

 

[kamyotte]

Ah alright, Thank you! He threw in a few free things, such as a low temp sensor, 2 motion sensors and a panic button for upstairs. Now do you know if I'm able to add a second keypad to another part of the house? Thanks!

 

[RAL]

Yes, you can connect multiple keypads to the panel.  I believe you will need to wire them in a daisy chain fashion.
 
You need to consider the total power that all of your keypads, any expanders, and wired sensors draw from the panel.  And don't forget the cellular module if it is powered from the panel.  The panel can provide a maximum of 2 Amps of power (1 Amp for keypads, and 1 Amp for AUX devices).  You should be conservative and not get too close to the limit.  80% or 800 mA for each is a reasonable limit to stay below. 

 

[kamyotte]

Perfect thank you very much!!