OmniProII and Centralite Jetstream

Steve

Senior Member
My understanding is that the OPII should reflect Jetstream status, as in when a Jetstream switch/button is pressed the OPII should know this. It's not working for me...

I can control Jetstream devices via the OPII fine (manually and via rules) but if I turn a switch on/off it is not reflected in the OPII. The Jetstream bridge and all switches have the 3rd party checkbox on.

Any ideas?
 
Steve,

Try hooking the Jetstream bridge to a terminal emulator on a PC to make sure that it is actually sending the status updates. If it is, verify the cabling between the Jetstream bridge and the OmniPro II.
 
Back
Top