remote audio from M1

[znelbok]

I have two areas set up on my system at home, one is the shed and the other is the main house.

The echo speaker is obviously connected to the main board - which is in the house.

The shed is connected by an underground cable run and has zone input expanders there for all the inputs that I need.

What I want to add is an echo speaker up in the shed for that area. I can run speaker cable from the house to the shed as the cable is buried, and I dont want to have everything that is broadcast in the house broadcast in the shed ( and vise versa).

Can this be done.

Thanks

Mick

 

[shenandoah75]

What exactly do you want broadcast?

if it's a few (i.e. under 8) doorbell/etc - you could use the elk voice recordable modules (120/124) and trigger those outputs from the M1

http://www.elkproducts.com/recordables.htm

hope that helps
-brad

 

[znelbok]

What exactly do you want broadcast?

if it's a few (i.e. under 8) doorbell/etc - you could use the elk voice recordable modules (120/124) and trigger those outputs from the M1

http://www.elkproducts.com/recordables.htm

hope that helps
-brad

Just standard messages, zone armed, disarmed. A/C is running and door/window open, motion detected.

I'll have a read of the link

Mick