Setting up an ECO4 on a TS07

Sacedog

Sacedog

Active Member
So, I am trying to get a DM ECO4 set up to be viewed on a TS07 through Elk RM. I can't seem to get the settings right...the TS07 says connecting, then could not connect.

Here are my settings:

camera type: Dedicated Micros(Digital Sprite 2)
IP Address: http://192.168.2.11
Port: 80
username: user
password: password
query: /live.cgi?/camera=1&quality=hi

I can access it through the network app that comes with teh Eco 4, but the TS07 just doesn't want to work. Any ideas would be appreciated. :rolleyes:
 
You mention that you can access the camera with the ECO4 application, but can you access it with a regular browser? If the camera depends on a dedicated network client in order to be able to view the feed, I doubt the ElkRM software can support this.
 
Dan (electron) said:
You mention that you can access the camera with the ECO4 application, but can you access it with a regular browser? If the camera depends on a dedicated network client in order to be able to view the feed, I doubt the ElkRM software can support this.
Click to expand...

I can get to the camera by connecting through IE, then running their ActiveX applet to view the camera feed. I thought, however, that it was also accessable using Elk RM (as it says that it is supoprted on their website under the supported devices page for the TS07). I was just noting that I could access it, so that you knew that it was working, and available on the network.
 
If it is supported, then it should work :rolleyes: Did you add it as a video feed, or static image?
 
If using Dedicated Micros, you should be able to view the image with the TS07. Use the TS07 image/video setup software and select Dedicated Micros.
 
You must log in or register to reply here.
Back
Top