Omnipro ii Night Zones

Is there a way to program what zones to monitor during Night mode?
It is a two story house and I do not want to include every "Exterior" door or window.  I have a balcony door upstairs that I would like to open during the night as well as the upstairs motions and windows.
 
Thanks
Mike

You can make that door or the windows an Away Interior  (AWAY INT) zone, so they will only be armed in Away or Vacation modes.
Even though it is labelled "interior, it will work the same as a perimeter zone i.e., no delay.
 
The upstairs motions should already be Away Interior (that is what the zone type is designed for).
 
Or you can add programming such as:
 

WHEN ARM NIGHT
    THEN Balcony Door IS BYPASSED

 
That will automatically bypass the door every time Night Mode is initiated.

Awesome,
Thank you for your help.