Recent content by Mvesprini

The trouble I am having is controling scenes I have created for the ISY. In particular, when I want to trigger a scene with another device, such as a double tap on a switch linc dimmer. For instance, in my master bathroom, I have 7 seperate lights controlled by 5 switch linc dimmers, a switch...

Typically Insteon group communication will be more susceptible to powerline issues since they aren't repeated and verified like device communication. Because group cleanup (which is used for group commands verification) is halted/interrupted when any subsequent Insteon commands are sent. So...

I have a power Monterey Instruments Power line signal analyzer I purchased in an attempt to locate and eliminate power line noise in my home. I used to have a fair amount of X-10 switches in my home but I have now swapped those out for an insteon network. I am still experiencing some...

Thanks again, I guess I would still need to reset the PLM though. Yes? Upon Further review, I do not think it would be such a big deal to redo the IR links so I will reset those as well. I have had homeseer shutdown while I have been resetting the devices. I have not yet...

OK, Today is the day. I got the ISY-99 and have installed it. Next step is to factory reset all my insteon devices. Does Everything meen EVERYTHING?? I tought we where just talking about switchlinks, appliance links, but then I realized that I have access points, filterlincs, boosterlincs...

Upstatemike, I can't thank you enough for your quick and concise response. I am sure you have saved me hours if not days of frustration. I have been doing HA for a couple of years now and I know what you just did for me and hopefully, for many others who are migrating from X-10 to...

I am a Homeseer user. I am in the middle of converting about 70 - X-10 Devices over to Insteon. So far I have replaced about 20 switches. It is pretty time consuming linking, setting ramp rates, and on levels from the swithches and Key pads. So, I am in search of a device / software that...

Right, I am not trying to Dim, Just on and Off. Looks like I may have to upgrade that swich to a two way device. MV

I recently Purchase some socket Rockets from Smart home to control some of my basement lights. I am running Homeseer 2.66 and I have a leviton HCM06 (X-10)with 1 slave switch controling the main room lights and a Leviton 3button scene controller on this circuit. House Code for these are B-4...

Thanks to all who have replied. Since my posting I have removed all of the 6201's from my system, left the Smarthome booster linc and the Signal linc repeater ( for the 220v Dryer) in place. Every thing seams to be working OK....... for now. Stay Tuned MV

Preview Help with Dimming -------------------------------------------------------------------------------- Help with Dimming I am running Homeseer v 2.1.104.0 I have a mixture of Model HCM06 and 16383 Leviton dimmers installer in my home. These do not seem to dim where I want them to...

I am running Homeseer 2.1.104.0 I have the following Leviton devices installed in a large home. HCC4A 14 each HCCS7 5 each HCM06/16383 22 each Model? 15 each ON/ Off only X-10 wall Switches 6201 Coupler / Repeater - 2 each. One installed at the Main 400...

I have a universal remote MX 850 and lights in my theatre controlled by X-10.I have a Powerhouse IR 543 command center. What I need is on/ off /dim / bright codes for X-10 that I can download into the MX editor Program or would it be easier to buy a remote that is capable of sending the codes...

Clear as Mud. I will have to read that over about a dozen times but I think I will eventually get it. I have no idea about what script is and how to write it. What is the best way to get familiar with script. Is there a "Script writing for Dummies" book out there any? Thanks for the reply. MV

I need some help with setting some conditions associated with a trigger. I have an event set to turn on some hallway lights from my upstairs to my kitchen when I get up in the morning. The event is trigger by my motion sensor that is tied into my alarm panel that homeseer can see. I have the...