II tested my switch with a meter. Nothing is wrong. It switches "short cirquit" from NO to NC (in my case from zone 17 to zone18).
Double check Zone settings - 16=Non-Alarm; 2=Normaly Open; Area 3;Fast loop response;Enable chime;
Connect my test switch to Input 1 and 2 on mainboard, configured same way as before. Status sees it, it's OK. Smth wrong with M1XIN? Will try it on Address 2.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.