Hi,
I have an Omni IIe panel with two zone expansion boards 10A06-1set to address 1 and 2 and configured as follows:
Module 1 > Hardwire Expander
Module 2 > Hardwire Expander
Module 3 > Access Control
Module 4 > HAI Hi-Fi 2
Serial ports connecte:
Serial 1 > empty (232)
Serial 2 > empty (232)
Serial 3 > Access Control (485)
Serial 4 > HAI Hi-Fi 2 (232)
Serial 5 > Email Board (232)
Each time the alarm is activated, I get a Fuse Trouble notification and have to reset the outputs to clear it. Is something not configured correctly or what could be causing the fuse trouble when the alarm goes off?
I have an Omni IIe panel with two zone expansion boards 10A06-1set to address 1 and 2 and configured as follows:
Module 1 > Hardwire Expander
Module 2 > Hardwire Expander
Module 3 > Access Control
Module 4 > HAI Hi-Fi 2
Serial ports connecte:
Serial 1 > empty (232)
Serial 2 > empty (232)
Serial 3 > Access Control (485)
Serial 4 > HAI Hi-Fi 2 (232)
Serial 5 > Email Board (232)
Each time the alarm is activated, I get a Fuse Trouble notification and have to reset the outputs to clear it. Is something not configured correctly or what could be causing the fuse trouble when the alarm goes off?