Mp333
Active Member
Just wondering what is the actual draw on XEP.
I have got a PD9 with a 12v 6A power supply feeding it. I wanted to feed XEP from PD9. However the current is limited to 250mA.on each output of the PD9. The XEP specs the draw at approx 300mA. I measured the current draw and it comes up at 90mA from start to normal op mode. Does it draw more when M1 goes into Alarm mode.
I have jumped two outputs in parallel on PD9 to supply XEP for now to give max of 500mA.
Thanks
I have got a PD9 with a 12v 6A power supply feeding it. I wanted to feed XEP from PD9. However the current is limited to 250mA.on each output of the PD9. The XEP specs the draw at approx 300mA. I measured the current draw and it comes up at 90mA from start to normal op mode. Does it draw more when M1 goes into Alarm mode.
I have jumped two outputs in parallel on PD9 to supply XEP for now to give max of 500mA.
Thanks