Recent content by albright_family

Ok, I am aware this may have been brought up in other topics, however what I am looking for is an inexpensive DVD Changer (at least 200 disc) with an RS-232 port for DVD Lobby to control. Got any suggestions? Thanks in advance for any help that you can provide

Is there a brick and mortar building that I can buy this from?

Will this capacitor work: 0.1 uF Metallized Polyester Film Capacitor rated at 250V work. Here is the URL: Radioshack's 0.1 Microfarad 250V capacitor Please let me know, and I assume, I just screw this into 2 of the emtpy screw for one of the phases on one side. (one side going into Phase A and...

Ok how do I do this?? I am unsure how to do this kind of macro programming inside Homeseer Thank you (BTW, I do have a TM751 RF tranceiver now plugged in on the opposite phase)

Okay I just tried this (with the oven element on only, the stove element on only, and then both), it is a no go I'll say, I just removed the cover of our circuit breaker panel, and I was shocked at what I found. Ok not really, but I got 2 really thick cables on one phase going to my AC unit...

Well in our little apartment, I have not had any problems reaching outlets except for those couple of lights/outlets on one side of our master bedroom. Every other light/outlet responds quite quickly. I think, for the time being, I am going to try using a BoosterLinc (which I just ordered...

How about a little more info about my situation. I live in an 2 bed/ 2 bath 950sq ft apartment. It does not have a dryer (for the plugin coupler/repeater). Question, will the plugin version of the coupler/repeater that is meant for a dryer work for an electric stove? I know our stove has a funky...

I don't know if this is the correct thread to post this in, but anywho I am using Homeseer v2 with the PowerLinc 1132U and CM19A interfaces. I also have a X10 mini-controller (bought from Radioshack). From the same outlet, I can control a certain light with the mini-controller but for whatever...

Sorry to be a newbie, but.... I have already purchased the CM19a, and according to the readme file, it says that it can receive all housecodes just like the W800. But what I am using the CM19A for is to control 3 Ninja Pan-N-Scan mounts that I bought when I was first starting out in HA (and I do...