Recent content by TheWolf56

Thanks Mike,   Unfortunately, neither JMAC nor Honeywell's website have documentation online for installation and enrollment.  Neither did smarthome (another resource I frequently use for manuals).  The M1XRF2H+ instruction sheet does not have the 5800COMBO listed.  I have enrolled a couple of...

Hello, I have an Elk M1G that seems to be working well for me, but now I want to add smoke detectors and CO monitors to the system. My house is only 2 years old and almost all sensors are hardwired, except for a couple of Honeywell 5853s paired to the M1XRF2H+ (along with a couple of keyfobs)...

I'm not a BI expert, but that is not just a big jump in resolution as much as it is a big jump in bandwidth for BI to process. With the camera change, it is going from about 1.6 Mb/s to about 10.5 Mb/s with that resolution and framerate (assuming h.264 for both sets of cameras. I would suggest...

I just wanted to say that thanks to your help, I was able to install the new wired sensor and test that it is working correctly now.   While I was at it, i installed a new keyfob for my wife and added 2 Honeywell 5853 wireless glass break detectors (it took me a little while to figure out why I...

So, thanks to the suggestions by BraveSirRobbin and pete_c to use a multimeter, I figured out the problem with the sensor on the window.   The window sensors that were pre-wired with the house had 2 leads going into the wall, but had 4-conductor cables terminating at the site of the alarm...

  Thank you, BraveSirRobbin.  I would have replied yesterday, but I'm still restricted on posts.  I have a couple of multimeters here (1 analog and 1 digital) that I used to determine the type of contacts that were installed before programming out the supervision resistors (another item to add...

Hello Everyone!   I've been a long time lurker to the forum, but I have learned a lot from this forum, especially from the Home Security sub-forum.  Because of everything I read, I had my house pre-wired for an alarm (pre-wired for all windows, all entry doors and garage utility door, indoor...

Hello geogecko.  He created another thread on this here  http://cocoontech.com/forums/topic/30141-low-cost-247-lte-failoverfailback-solution/  I've read through that and still need to read through the other thread to see his solution.