pete_c
Guru
Generac Model # 0058370 7kW Air-cooled automatic stand by generator - Installed 2015
Total cost ~ $35.00 plus labor.
Amazon order:
Step by step:
1 - pull fuse
2 - shut off breaker on Generator
3 - disconnected Negative on battery
4 - drained oil in to milk gallon containter
5 - removed and replaced oil filter. Hand tightened
6 - removed and replaced air filter
7 - removed and replaced new spark plug which I checked gap before installing. Old plug looked OK.
8 - put a quart and .1 of a quart of 10W30 Synthetic blend and checked dip stick for level
9 - connected battery negative, installed fuse, replaced fuse
10- ran manually for 5 minutes and checked oil level to be good
11 - cleaned engine a bit with vinegar spray and armor all.
12 - put side panels back on
13 - set the weekly timer 12 minutes on Wednesday at 11 AM
14 - put cover on
Total cost ~ $35.00 plus labor.
Amazon order:
1 - Generac Maintenance Kit for CorePower Home Standby Generator - Essential Package for Optimal Performance and Longevity of Your Power Solution $25.99
2 - 2 quarts of 10w-30 oil synthetic - used Mobile 1 that I had in my garage. One quart plus .1 quart used.Step by step:
1 - pull fuse
2 - shut off breaker on Generator
3 - disconnected Negative on battery
4 - drained oil in to milk gallon containter
5 - removed and replaced oil filter. Hand tightened
6 - removed and replaced air filter
7 - removed and replaced new spark plug which I checked gap before installing. Old plug looked OK.
8 - put a quart and .1 of a quart of 10W30 Synthetic blend and checked dip stick for level
9 - connected battery negative, installed fuse, replaced fuse
10- ran manually for 5 minutes and checked oil level to be good
11 - cleaned engine a bit with vinegar spray and armor all.
12 - put side panels back on
13 - set the weekly timer 12 minutes on Wednesday at 11 AM
14 - put cover on
Last edited: