HAI Omni and CO2 detector

[Mike C]

Hi all,

I have an HAI Omni and added a GE Carbon Monoxide detector.

My problem -> when the system switches alarm modes ie off to night, the CO detector emits a brief squawk. Its enough that kids stir and the WAF is low. This must be related to power cycling of the controller during arm/disarm but I am unsure how to fix. Any ideas?

Thanks!

 

[jlehnert]

Somethings hooked up incorrectly. I've got an OmniPro with the GE CO detectors, and do not have that problem.

 

[Mike C]

Somethings hooked up incorrectly. I've got an OmniPro with the GE CO detectors, and do not have that problem.

I am wondering if I should be powering from one of the outputs and 12v Aux power.... what are you using?

 

[jlehnert]

I've been out of town for the past few days, and I'm on duty tonight. I'll try to take a look tomorrow.

 

[Mike C]

Thanks, let me know

 

[jlehnert]

Whoops. Me bad. My mom decided to drop by on a whim, and I completely forgot about answering you. Haven't even been by CT since last week. And I'm on duty again today. I 'll check. Promise. I sent myself an email as a reminder.

 

[jlehnert]

12V continuous power to the detector (AUX power on the panel)
One wire into COM
EOL resister between COM and NO
The other wire into NO